 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BT 07/10/15/22/27 CPM-85 -- 7.5/10/15/22.5/27.5 Radial Leads 63/100/160/250/400/630 VAPPLICATIONS Non-inductive, self-healing, metallized polyester film capacitor. Insulated* thermoplastic casing, epoxy resin sealed with stand-offs*. Radial connections. * Flame retardant resin and case according to UL 94 VO. Schematic Cross Section Schoop Metallized film Some examples of use: Supply decoupling, filter, integrators, treatment of analog signals, rejection of line perturbations, etc. L 0.4 (0.016) min . LS ---- for case* in table page 15 DIMENSIONS: Size Code 07 10 15 22 27 millimeters (inches) H max. 8.0 ... 12.0 (0.315 ... 0.472) 9.0 ... 13.5 (0.354 ... 0.531) 10.5 ... 14.5 (0.413 ... 0.571) 15.0 ... 19.5 (0.591 ... 0.768) 19.5 ... 30.0 (0.768 ... 1.181) L max. 9.25 ... 10.1 (0.364 ... 0.398) 12.5 (0.492) 17.5 (0.689) 26.25 (1.033) 31.25 (1.230) e max. 3.25 ... 6.0 (0.128 ... 0.236) 4.0 / 5.0 (0.157 / 0.197) 5.0 ... 8.5 (0.197 ... 0.335) 7.5 / 10.0 (0.295 / 0.394) 10.0 ... 17.5 (0.394 ... 0.689) LS 0.4 7.5 (0.295) 10.0 (0.394) 15.0 (0.591) 22.5 (0.886) 27.5 (1.083) +10% o -0.05 Observations 1nF C 1F R R R R R 0.6 (0.024) 0.6 (0.024) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 4.7nF C 470nF 33nF C 2.2F 100nF C 6.8F 330nF C 22F HOW TO ORDER BT 10 Type 4 Class G Voltage 0104 Capacitance Value K Tolerance 6 (0.236) - 1 (0.039) Generic specifications: CEI 384-1/CECC 30000/UTE 83100 Sectional specifications: CEI 384-2/CECC 30400/UTE 83151 On the LNZ list: Complies with type CPM85 - CPM-R + 0 (0.000) H STANDARDIZATION e -- Suffix Tape and Reel See page 27 PERFORMANCE CHARACTERISTICS Climatic category: Capacitance range: Tolerances on CR: 55/100/56 - Performance Class 1 CR 1 nF to 2.2 F (E6) 5%, 10%, 20% (other values on request) Nominal voltages: VR- 63/100/160/250/400/630 V VR~ 40/63/80/160/200/220 V Category voltage: VC = 0.8 VR- at 100C Test voltage: Ve = 1.6 VR-/2 s at 25C Tangent of loss angle: D.F. (see page 4) Insulation resistance: IR (see page 5) Max. voltage gradient: (dv/dt)R (see page 5) Size 07 10 15 22 27 VR- 63 35 18 12 4 3 100 50 28 15 5 4 dv/dt V/s 160 250 400 - 30 20 - 6 72 45 30 9 7 150 90 55 12 10 630 300 180 100 20 15 MARKING Logo Nominal capacitance Tolerance (EIA code) DC nominal voltage 14 TPC BT 07/10/15/22/27 NOMINAL VOLTAGE (VR) AND CAPACITANCE VALUES (CR) DEPENDING ON THE DIMENSIONS S i z e C a s e 1 2 07 C D EO 10 4 6 7 15 IO 8 9 11 22 12 13 16 17* 27 18* 19* DIMENSIONS: millimeters (inches) Max L 9.25 (0.364) 10.1 (0.398) 10.1 (0.398) 10.1 (0.398) 12.5 (0.492) 12.5 (0.492) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 17.5 (0.689) 26.25 (1.033) 26.25 (1.033) 26.25 (1.033) 31.25 (1.230) 31.25 (1.230) 31.25 (1.230) 31.25 (1.230) Max H 8.0 (0.315) 10.0 (0.394) 11.0 (0.433) 12.0 (0.472) 9.0 (0.354) 10.0 (0.394) 10.5 (0.413) 13.5 (0.531) 12.0 (0.472) 13.5 (0.531) 14.5 (0.571) 15.0 (0.591) 17.5 (0.689) 19.5 (0.768) 19.5 (0.768) 22.5 (0.886) 26.0 (1.024) 30.0 (1.181) Max e 3.25 (0.128) 5.0 (0.197) 5.0 (0.197) 6.0 (0.236) 4.0 (0.157) 5.0 (0.197) 5.0 (0.197) 5.0 (0.197) 6.0 (0.236) 6.25 (0.246) 8.5 (0.335) 7.5 (0.295) 7.5 (0.295) 10.0 (0.394) 10.0 (0.394) 12.5 (0.492) 15.0 (0.591) 17.5 (0.689) O +10% -0.05 LS 0.4 63/40 68 nF ... 220 nF Reference BT VR-/VR~ 100/63 160/80 250/160 400/200 Range of Capacitance (CR min. ... max.) 22 nF ... 150 nF 220 nF/330 nF - - - - - - 6.8 nF ... 47 nF 68 nF ... 100 nF - 150 nF 33 nF ... 100 nF - 68 nF ... 220 nF - 330 nF 390 nF - 470 nF/680 nF - 1 F/1.5 F 1.5 F 2.2 F 3.3 F 4.7 F 1 nF ... 22 nF - - 33 nF ... 47 nF 6.8 nF ... 33 nF 47 nF 47 nF/68 nF 100 nF - 150 nF - 220 nF 330 nF 470 nF 470 nF 680 nF 1 F 1.5 F 2.2 F 630/220 1 nF ... 3.3 nF 4.7 nF/6.8 nF 10 nF 15 nF - 4.7 nF/22 nF 33 nF - - 47 nF 68 nF 100 nF 150 nF 220 nF 330 nF 470 nF 680 nF 1 F 0.6 (0.024) 0.6 (0.024) 0.6 (0.024) 0.6 (0.024) 0.6 (0.024) 0.6 (0.024) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 7.5 (0.295) 330 nF/470 nF 680 nF 1F 10.0 (0.394) 220 nF ... 470 nF 100 nF ... 220 nF 100 nF ... 220 nF - 680 nF ... 1 F - - 150 nF ... 1 F - - - - 1.5 F 2.2 F 3.3 F 4.7 F 6.8 F 10 F - - 330 nF/470 nF - 680 nF 1 F 2.2 F - - - 3.3 F - - - 15.0 (0.591) 2.2 F - - - 22.5 (0.886) 3.3 F 4.7 F/6.8 F 6.8 F 27.5 (1.083) 10 F 15 F 22 F TPC 15 BT 07/10/15/22/27 CHARACTERISTIC CURVES Influence of the frequency on the impedance (room temperature) Z () Size : 0.7 100 Z () Size : 10 10 10 1 - - 22 10 - nF 4. 7 nF 1 0.1 - 22 - - - 0 10 0 47 nF nF nF 0.1 0.01 47 0 nF nF - 10 nF - 22 nF - 47 nF F - 100 n F - 220 n F - 470 n - 1 F 0.01 0.1 1 10 100 (MHz) 0.001 0.1 1 10 100 (MHz) Z () 100 Size : 15 Z () Size : 22 100 10 10 1 1 nF - 33 0 nF - 10 0 nF - 22 0 nF - 47 F -1 0.1 0.1 nF 00 -1 nF 20 -2 nF 70 -4 F - 1 F .2 -2 -4 0.01 0.1 1 10 100 (MHz) 0.01 0.01 - 2.2 F -6 .7 0.1 10 (MHz) .8 F F Z () 100 Size : 27 10 1 0.1 0 - 33 F -1 F - 2.2 .7 F -4 0.01 0.01 0.1 16 TPC F - 10 F - 22 nF 10 (MHz) BT 07/10/15/22/27 CHARACTERISTIC CURVES Nominal RMS voltage vs. frequency (room temperature) allowing a 10C increase of the external temperature of the box. Vrmsmax. 103 103 Vrmsmax. Cases V R - : 63 V 160 Cases V R - : 250 V 102 40 102 101 100 nF 220 nF 470 nF 1 F 2.2 F 4.7 F 102 103 104 105 106 (Hz) 10 1 22 nF 47 nF 100 nF 220 nF 470 nF 1 F 2.2 F 4.7 F 101 101 102 103 104 105 106 (Hz) Vrmsmax. 103 103 Vrmsmax. Cases V R - : 400 V Cases V R - : 100 V 200 102 63 102 101 22 nF 47 nF 100 nF 220 nF 470 nF 1 F 2.2 F 4.7 F 10 F 101 102 103 104 105 106 (Hz) 101 22 nF 47 nF 100 nF 220 nF 470 nF 1 F 2.2 F 101 102 103 104 105 106 (Hz) Vrms max. 103 103 Vrms max. Cases V R - : 160 V 220 Cases V R - : 630 V 102 102 4,7 nF 10 nF 22 nF 47 nF 100 nF 220 nF 470 nF 1 F 101 100 nF 220 nF 470 nF 1 F 3.3 F 101 101 102 103 104 105 106 (Hz) 101 102 103 104 105 106 (Hz) TPC 17 BT 07/10/15/BC 15 BO 07/10/15/BD 15 7.5/10/15 - Radial Leads - Taping on Reel for Automatic Insertion CHARACTERISTICS OF THE REEL - Suffixes to be used (see page 7) millimeters (inches) 6 (0.236) 0.2 (0.008) Lead spacing: 7.5 (0.295) Taping Suffix EN Lead Spacing tol 0.4 (0.016) 7.5 (0.295) P H 12.7 1.0 (0.5 0.039) 16.5 0.3 (0.650 0.012) 10 (0.394) 25.4 1.0 (1.0 0.039) 16 +1.5 -0.5 (0.630 +0.059 -0.020 H 15 (0.590) O 4 (0.157) 3 (0.012) ) L.S. 12.7 (0.500) 0.2 (0.008) Lead spacing: 10/15 (0.394/0.590) 6 (0.236) 0.2 (0.008) H PACKAGING Size Case Code 1 2 C D E0 4 5 6 7 I0 8 9 10 11 12 13 14 15 16 17 18 19 Minimum Quantity* Reel Bulk 2000 1250 1250 1000 850 700 700 1000 1000 1000 833 625 - - - - - - - - - - 3000 1750 1500 1000 1750 1250 1000 750 3000 750 3000 2000 225 200 200 150 160 140 120 100 80 65 O 4 (0.157) 0.3 (0.012) 12.7 (0.500) 0.2 (0.008) L.S. P 7.5 Adhesive tape (Other sizes according to standard CEI: 286-2) Dimensions millimeters (inches) 10 15 Lead Spacing 7.5/10 15 D 360 (14.173) 500 (19.685) E (ext) 48 (1.890) 52 (2.047) O 31 (1.220) 22 27 D E * Ordering quantities must be a multiple of the above figures TPC 18 (0.709) 0.5 (0.020) 18 (0.709) 0.5 (0.020) 27 Metallized Polyester Film Dielectric Capacitors Type Selection Guide Type Presentation TPC BF C83151 CPM-N BH C83151 CPM85 BT Radial Leads CPM85 BG C83151 C83151 UTE CPM-83 Nominal Voltage VR-(V) 63 ... 400 VR~(V) 40 ... 200 Capacitance Range (CR) Tolerance on CR (Series) 5% (E6 - E12) Lead Spacing mm (inches) 1 nF ... 2.2 F 10% (E6 - E12) 5% (E6 - E12) 5.08 (0.200) 63 ... 400 40 ... 200 1 nF ... 2.2 F 10% (E6 - E12) 5% (E6 - E12) 10% (E6 - E12) 20% (E6 - E12) 5% (E6 - E12) 10% (E6 - E12) 20% (E6 - E12) 5% 10% 5.08 (0.200) 7.5 (0.295) 10.0 (0.394) 15.0 (0.591) 22.5 (0.886) 27.5 (1.083) 7.5 10.0 15.0 22.5 27.5 (0.295) (0.394) (0.591) (0.886) (1.083) 63 ... 630 40 ... 220 1 nF ... 22 F 63 ...1,000 40 ... 250 1 nF ... 22 F 250 BC / BD CPM50 BO C83151 CPM13 S4 C83151 63 ... 400 40 ... 400 - 0.47 F ... 2.2 F 15.0 (0.591) 25 ... 200 1 nF ... 22 F 5% (E6 - E12) 10% (E6 - E12) 20% (E6 - E12) 7.5 10.0 15.0 27.5 (0.295) (0.394) (0.591) (1.083) 40 ... 200 1 nF ... 10 F 5% (E6 - E12) 7.62 (0.300) 10.16 (0.400) 10% (E6 - E12) 15.24 (0.600) 20% (E6 - E12) 27.94 (1.100) CPM8 S8 C83151 CPM8 SH C83151 Axial Leads S9 C83151 CPM72 SG C83151 630 ... 10,000 ST 100 pF ... 1.5 F 63 ... 1,000 40 ... 250 1 nF ... 22 F CPM72 100 ... 630 40 ... 220 1 nF ... 10 F 63 ... 1,000 40 ... 250 1 nF ... 22 F 63 ... 400 40 ... 200 1 nF ... 10 F 5% (E6 - E12) 10% (E6 - E12) 20% (E6 - E12) 5% (E6 - E12) 10% (E6 - E12) 20% (E6 - E12) 5% (E6 - E12) 10% (E6 - E12) 20% (E6 - E12) 5% (E6 - E12) 10% (E6 - E12) 20% (E6 - E12) 5% (E6 - E12) 10% (E6 - E12) 20% (E6 - E12) 6 TPC Metallized Polyester Film Dielectric Capacitors HOW TO ORDER Example of an order: how to order a CPM85 100 nF 10% 100 V. BT07 4 E 0104 K -- Identification Code Radial Leads CPM83 BF 01 CPM83 BF 02 CPM83 BF 05 CPM83 BF 06 CPM83 BF 07 CPM-N BH 01 CPM-N BH 02 CPM-N BH 05 CPM-N BH 06 CPM-N BH 07 CPM85 BT 07 CPM85 BT 10 CPM85 BT 15 CPM85 BT 22 CPM85 BT 27 CPM85 BG 07 CPM85 BG 10 CPM85 BG 15 CPM85 BG 22 CPM85 BG 27 - BC 15 - BD 15 CPM50 BO 07 CPM50 BO 10 CPM50 BO 15 CPM50 BO 27 CPM13 S4 07 CPM13 S4 10 CPM13 S4 15 CPM13 S4 27 Axial Leads CPM8 S8 10 CPM8 S8 14 CPM8 S8 18 CPM8 S8 31 CPM8 SH 13 CPM8 SH 18 CPM8 SH 25 CPM8 SH 30 CPM8 SH 40 CPM72 S9 10 CPM72 S9 14 CPM72 S9 18 CPM72 S9 27 CPM72 S9 31 CPM72 SG 13 CPM72 SG 18 CPM72 SG 25 CPM72 SG 30 CPM72 SG 40 - ST 22 - ST 36 Dielectric Class 4 Voltage Code C = 25/40 V D = 50/63 V E = 100 V F = 160/200 V G = 250 V H = 275/300 V I = 400 V J = 500 V K = 600/630 V L = 1000 V M = 1600 V N = 2000 V P = 2500 V Q = 3000 V R = 4000 V S = 5000 V T = 6000/6300 V U = 8000 V V = 10 kV Capacitance (EIA code) Tolerance Code Capacitance expressed by 2 J = 5% significant figures K = 10% 1st digit: 0 (zero) M = 20% 2nd and 3rd digit: the 2 significant figures of the capacitance value 4th digit: - for values 10 pF and 990 F: the number of zeros to be added to the capacitance values - for values 1 pF and 9.9 pF: the numerical 9 signifying that the capacitance value is to be multiplied by 0.1 - for values < 1 pF: the numerical 8 signifying that the capacitance value is to be multiplied by 0.01 Example: 1000 pF = 0102 8.2 pF = 0829 0.47 pF = 0478 Capacitance expressed by 3 significant figures 1st, 2nd and 3rd digit: the 3 significant figures of the capacitance value 4th digit: - for values > 100 pF and 999 F: the number of zeros to be added to the capacitance values - for values > 10 pF and < 100 pF: the numerical 9 signifying that the capacitance value is to be multiplied by 0.1 - for values > 1 pF and < 10 pF: the numerical 8 signifying that the capacitance value is to be multiplied by 0.1 Example: 196 pF = 1960 47.2 pF = 4729 8.28 pF = 8288 Suffix DA - DB - DC - DD: lead spacing 5.08 mm taped on reel or ammopack EN Radial types: lead spacing 7.5/10/15 mm taped on reel H=16.5 mm Axial type: (SG series only) Ammopack EP: Taped on reel H=18.5 mm (only for BG type) GA or GB: standard axial taped (S8, S9, ST types) - - Bulk TPC 7 |
Price & Availability of BT154
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |